1000 × 2000 mm fixture table.
DIY fabrication kit · 6 mm or 8 mm top · Optional leg kit
Choose your setup · Construction details · Assembly guidance
Product view shown with the optional table leg kit.
- Working surface
- 1000 × 2000 mm
- Material
- S275 mild steel
- Workholding system
- 16 mm holes · 50 mm pitch
- Construction
- 6 mm tab-and-slot structure
Supplied as a DIY fabrication kit. Competent assembly and welding required. Read the assembly guidance.
CONFIGURE YOUR TABLE
No VAT is charged — Danells Off-Road Ltd is not VAT registered.
Pallet delivery available. Collection by prior arrangement from Peterborough.
Checkout and payment are completed securely through Shopify.
Built into the structure
Designed to locate before it is welded.
The internal ribs and perimeter plates use tab-and-slot features to help establish the table geometry during assembly. The structure then welds into a deep, braced box rather than relying on a flat sheet and a simple frame.
6 mm S275 supporting structure
200 mm internal bracing intervals
Tab-and-slot weld-together construction
Workholding system
Workholding beyond the top.
The 16 mm hole pattern continues across the top and all four 150 mm-deep side faces, so work can be located and clamped around the table rather than only on the flat surface.
16 mm
Workholding hole diameter
50 mm
Regular hole pitch
150 mm
Side depth for vertical setups
DIY assembly
Your welding. Our cut parts.
This is a fabrication kit, not a flat-pack bench. It is intended for competent assembly and welding in your own workshop.
01 / ASSEMBLE
Locate the laser-cut structure using the tabs and slots.
02 / CHECK
Square, support and verify the table before committing to the weld sequence.
03 / WELD
Control heat input and complete the structure into a finished workshop table.